Battery analyzer is designed to check cells condition. When you buy new cells you must to check if they meet your needs or not. The most important parameters are cells impedance (internal resistance) and cells capacity. You don't need to check all the cells you bought. Check just several cells in a stock. If they match the parameters stated in specification then most likely whole stock is OK. First check the cells voltage. If they made by trusted manufacturer then all of them must have exactly the same voltage.
How to use:
Fully charge the battery using external adjustable power source. While charging limit the current with 1.5A and the voltage with number of cells in series * 4.2V. To check impedance and capacity use external load
Connect the battery to adapter.
Try to read it.
If you can read the battery then enter termination voltage value. This value is used to stop discharge automatically using pin 1 of GPIO adapter and electronic switch.
Press button to start.
5. If you use electronic switch then analyzer will start . If you don't use it then you'll be prompted to connect load.
